Dovpo M VV
Is a large box mod designed for advanced users; with a maximum output of 280W and powered by two 18650 vape batteries (sold separately). Due to the power output of this mod, it is recommended for use with sub ohm tanks and RDAs (Rebuildable Dripping Atomisers).
What sets Dovpo’s MVV Mod apart from other dual battery mods is its back-to-basics approach which mimics the functionality of a mechanical mod - this mod has VV (Variable Voltage) Mode only, with an output range of 1 - 8V.
The voltage level is set via the Potentiometer Dial at the bottom of the mod. Included in this kit is a conversion table advising the user on how to match the resistance of their coils to the correct voltage level.
Where you would find a screen on most standard box mods instead are four mounted LEDs that indicate battery life. This mod utilises the MVV chipset to increase safety when used, by providing short circuit protection, overheat protection, overtime protection, battery reversal protection and low voltage protection.
1 x Dovpo MVV Box Mod
1 x Conversion Table
1 x User Manual
Maximum Output 280W
Requires Dual 18650 Batteries
VAPECIGE VTX200 box mod
The VTX200 TC Box mod is for dual 18650 battery (not included).
Main interface: Power mode/SS316/Bypass/Ni200/Titanium. The vtx200 is made by ABS material which is so lightweight, and finished with rubber paint,which is soft hand feeling. And the battery cover have cool 3D style clown designs for your choose.
Main Specifications: Input Voltage 6.4V-8.4V; Output Power 1-200W; Resistance rang: 0.05-3.0ohm; 0.9" TFT color screen
Spartan 300w TC
Suitable battery: 3*18650 high-drain batteries
Output wattage: 5-300W
Output voltage: 12.6V(max)
Temperature Control Range:200F-600°/100-300°C
Loading resistance range: 0.05-3.00Ω
Suitable mode: VW
DIY TC (TCR reset control by yourself, new technology)
Batteries Not Included
VooPoo DRAG 157W TC Gene Chip Box Mod
Designed in California
The VooPoo DRAG 157W TC Box Mod with Gene Chip inside is a dual 18650 (sold separately) powered mod compatible with the VooPoo PC App for full customization and fine tuning settings. The Gene Chip inside the DRAG offers a full temperature control suite with 157W max power and a firing speed of 0.025 seconds! The VooPoo DRAG is a highly efficient variable wattage box mod with a chip efficiency rating of 95% for accurate and reliable power output. The chassis of the DRAG made from zinc alloy and has a carbon fiber accent panel on one side and the word DRAG lightly etched into the battery access door. The DRAG is compatible with the VooPoo PC App which allows the user to customize settings and add a customized logo to the display. The VooPoo DRAG 157W TC Box Mod is ideal for users looking for some serious power output with minimal fire delay for that SUPER DRAG!
Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.
5 to 157W Output
0.05 to 3.0 ohm Atomizer Resistance Range
0 to 7.5V Voltage Range
40A Max Current Ouput
95% Working Efficiency
Automatically Recommend Ideal Output
Can Easily Adjust
Activates Between 130 and 157W
0.1 to 0.3 ohm Atomizer Resistance Range
5 Bank Memory
VooPoo PC App Compatible
Temperature Control Suite
Ni200 Nickel Support
0.05 to 1.5 ohm Atomizer Resisatnce Range
200 to 600 Degrees Fahrenheit
Dual Magnetic Battery Access Door
Dual 18650 Battery Powered (sold separately)
Run in Series
Three Button Control
Enlarged Firing Button
Two Line 0.91 OLED Display
Temperature Mode and Output
Battery Life Indicator
Sleek and Beautiful Chassis Design
Stainless Steel Frame
Carbon Fiber Panel
Spring Loaded Gold Plated 510 Connection
Stainless Steel Thread Point
Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating/Anti Loaded/Timeout Protection
90mm by 54mm by 24mm
One VooPoo DRAG 157W TC Box Mod
One Micro USB Cable